11-02-2015, 11:27 PM
(This post was last modified: 03-18-2016, 04:02 AM by abdulkarim.)
After setting up page outline in TEMPLATE CONSTRUCTION - V, now we are going to set a specific area within our page.
We are going to take first main area out of our web page. In the following picture this area is called "main_page". HTML tag
We are going to take first main area out of our web page. In the following picture this area is called "main_page". HTML tag
is used, in particular
where id of this div is main_page.
In the following picture we see the result of the divisions, it is the basis of our template that we started in TEMPLATE CONSTRUCTION - I
90% of the width of browser page
5% margin on left, right and top
Shadow and Curvature is set for our main_page
Remember: You should never go back a step to fix something that you don't like now. Move to next step only if you are 100% satisfied with your current step/action. It means your page outline and your main_page should be how you want it to be.
You should also try to make your template partitions as colorful as possible, when complete you can always clear or change partition colors.
Next step is First Split: TEMPLATE CONSTRUCTION - VII
In the following picture we see the result of the divisions, it is the basis of our template that we started in TEMPLATE CONSTRUCTION - I
90% of the width of browser page
5% margin on left, right and top
Shadow and Curvature is set for our main_page
Remember: You should never go back a step to fix something that you don't like now. Move to next step only if you are 100% satisfied with your current step/action. It means your page outline and your main_page should be how you want it to be.
You should also try to make your template partitions as colorful as possible, when complete you can always clear or change partition colors.
Next step is First Split: TEMPLATE CONSTRUCTION - VII